Maintenance instructions
BASIC PRODUCT MAINTENANCE:
Ware rebelt can only be cleaned by hand. Do not machine wash or tumble dry!
A soft brush can be used to remove coarse dirt. For wiping, use a damp cloth or sponge soaked in lukewarm water with mild soap. Use a soft brush to clean the zippers. After cleaning, let the product dry thoroughly in a well-ventilated area. Do not dry in direct sunlight! Pay close attention to the metal parts of the products, such as buckles, buckles and zipper sliders. If the metal parts are wet, they must be dried very thoroughly to prevent possible oxidation.
Perform this basic maintenance regularly.
Used materials:
Ware rebelt are most often composed of materials in combination
- outer material X-Pac - four-layer laminate composed of 100% Polyamide PAD (nylon) - outer layer, 100% Polyester PES - lower layer. A thin PET film is laminated between these two materials to guarantee waterproofness and thin fibers to increase tensile strength,
- inner material (lining) - 100% Polyester PES with fine Polyurethane coating PUR,
- straps - 100% Polyamide PAD (nylon) or 100% Polypropylene PP,
- foam parts - 100% Polyethylene PE.
RECOMMENDED BACKPACK OR BAG WASHING PROCEDURE:
Brush off all coarse dirt and take out forgotten items.
Do not wash in the washing machine! Wash the bag or backpack in the bathtub using mild soap and lukewarm water. Brush all zippers and clean buckles. Then wipe off the soap foam from the backpack and rinse with clean, cold water. Let the bag or backpack dry thoroughly, preferably hung outside or in a well-ventilated area.
Do not dry in direct sunlight! Do not tumble dry!
After cleaning the stains and drying, you can impregnate the bag or backpack with an impregnation intended for the material from which the backpack is made (most often it is 100% Polyamide). Impregnation protects the product against water penetration and at the same time helps to prevent it from getting dirty as much and is easier to maintain.